Tentacle to 90° BNC – Timecode Cable
Cable (bidirectional) to feed timecode from Tentacle SYNC E or ORIGINAL Timecode Generator to any device that uses a BNC timecode in/out connector and vice versa.
TENTACLE TO 90° BNC CABLE
Bidirectional cable for transmitting timecode between any Tentacle Sync Timecode Generator SYNC E or ORIGINAL and a device that uses a BNC timecode in/out connector and vice versa. This cable features a 90° right-angle BNC connector. You need this cable if you want to connect your Tentacle to devices that accept and send timecode over BNC like the Canon C300 / C500, Sony PDW 700, ARRI Amira, Sony FS7 with XCDA-FS7 Extension, etc. It can be used to jam-sync a TRACK E Timecode Audio Recorder from an external timecode source as well.
Features:
- Direction: Bidirectional
- 90° Right-angle BNC connector
- Right-angle Neutrik 3.5mm mini jack (3-pin)
- Length: 40cm / 16 inches
Set of five coloured silicone bands & two spare Tentacle Clamps for the SYNC E Timecode Generator packed in a mini logo pouch.
Cable to feed timecode from Tentacle SYNC E and ORIGINAL Timecode Generator to RED cameras with a LEMO 4-pin SYNC port.
Cable to feed timecode from a device that uses a standard 5-pin LEMO connector to Tentacle SYNC E, TRACK E and ORIGINAL.
Cable to feed timecode from a device that uses a XLR 3-pin output to any Tentacle device.
Cable to feed timecode from Tentacle SYNC E or ORIGINAL Timecode Generator to devices with a Micro LEMO 3-pin timecode input A10-TX transmitter from Audio Limited or Zaxcom ZFR 400.