Tentacle to Micro-USB for Sony FX-3 / FX-30 - Timecode Cable
Brand:
Unit: piece
Qty: Available in Tallinn warehouse
Adapter cable to feed timecode from any Tentacle SYNC E & ORIGINAL timecode generator or TRACK E to a SONY FX3, FX30 and SONY A7S3 via the Multi/Micro USB Terminal. This is a low cost and smart alternative to the original Sony BNC adapters.
Please note: This adapter cable is only intended for use with a Tentacle ORIGINAL/SYNC E/TRACK E (soon with next Firmware Update) unit in conjunction with a SONY FX3, FX30 and A7S3. For use with devices from other manufacturers, we can not guarantee whether this works or exclude that damage may occur!
Features:
- Direction: Tentacle to Multi/Micro USB Terminal (SONY Multi-Camera Control Connector)
- Right-angle 3.5 mm mini jack (3-pin)
- Straight 15-pin Micro-USB Multi connector
- Length: 25 cm / 10 "
Tentacle TRACK E Pocket Audio Recorder with timecode and 32-bit float recording functionality with lavalier microphone, microSD card, accessories and a medium logo pouch.
Cable to feed timecode from Tentacle SYNC E and ORIGINAL Timecode Generator to RED cameras with a LEMO 4-pin SYNC port.
Cable to feed timecode from Tentacle SYNC E or ORIGINAL Timecode Generator to a Sound Devices 552 audio recorder.
Lockable 3.5mm mini jack cable with bare wire open end (Mono) to make your own microphone adapter for TRACK E.
Tentacle SYNC E mkII – Smart Bluetooth™ Timecode Generator (1 unit incl. accesories).