TENTACLE TO BNC CABLE
You need this straight BNC cable if you want to connect a Tentacle Timecode Generator SYNC E or ORIGINAL to devices that accept and send timecode over BNC like the Panasonic GH5s, Canon C300 / C500, Sony FS7 with XDCA-FS7, PDW 700 / EX3 / PMW 200, ARRI Amira. It can be used to jam-sync your TRACK E Timecode Audio Recorder from an external timecode source as well.
Features:
- Direction: bidirectional
- High quality right angled Neutrik 3,5mm mini-TRS jack
- High quality BNC connector
- Length: 40cm ( 16 inch)
Aluminum bracket with 15mm rod support for SYNC E exclusively manufactured by SmallRig.
Split a cable to feed timecode from Tentacle SYNC E or ORIGINAL Timecode Generator and audio fo a Sennheiser Evolution Bodypack Receiver to cameras with a 3.5 mm stereo input.
Cable to feed timecode from Tentacle SYNC E or ORIGINAL Timecode Generator to devices with a Micro LEMO 3-pin timecode input A10-TX transmitter from Audio Limited or Zaxcom ZFR 400.
Cable to feed timecode from Tentacle SYNC E or ORIGINAL Timecode Generator to devices with a Flash Synchro Connector (PC Connector) using it as timecode in/outputs like Panasonic LUMIX S1H and GH5s.
12,40 €
Microphone adapter to connect any lavalier microphone with a LEMO 3-pin connector (like Sennheiser, Audio Limited A10, Wisycom, Zaxcom) to the TRACK E Timecode Audio Recorder.